|

3D Model Creation with Autodesk Fusion 360 Coursera Quiz Answer

Today we are going to share all week assessment and quizzes answers of 3D Model Creation with Autodesk Fusion 360 Coursera Quiz Answer course launched by Coursera for totally free of cost. This is a certification course for every interested student

3D Model Creation with Autodesk Fusion 360

About this Course

Design is the first phase in the digital manufacturing process. In this course, through a series of lectures and hands-on lessons, we’ll examine a designer’s approach to the design and manufacturing process—from concept to 3D model. We’ll start by applying design thinking to understand user needs, and then we’ll explore design criteria as we dive deeper into Autodesk® Fusion 360™ sketching, modeling, rendering, and documentation features.

Looking for Autodesk Fusion 360 certification prep courses? Check out additional learning resources to help you uplevel your skills: https://www.autodesk.com/learning

These answers are updated recently and are 100% correct✅ answers of all week, assessment and final exam answers of 3D Model Creation with Autodesk Fusion 360 from Coursera Free Certification Course.

Use “Ctrl+F” To Find Any Questions Answer. & For Mobile User, You Just Need To Click On Three dots In Your Browser & You Will Get A “Find” Option There. Use These Option to Get Any Random Questions Answer.

Enroll Now – 3D Model Creation with Autodesk Fusion 360

3D Model Creation with Autodesk Fusion 360 Answer

Week 1 quiz

1.
Question 1
When selecting a motor, the first 4 numbers, for example, MR2205, represent what?

  • The max RPM of the motor.
  • Outside diameter and height.
  • Stator diameter and height.
  • Production date in week and
    year.


Question 2
What is the voltage of a 4s battery?

  • 11.1v
  • 3.7v
  • 12.0v
  • 14.8v


Question 3
If you were designing a quadcopter that was maneuverable in flight, where would you try to locate the
mass in relation to the thrust plane?

  • Centered on the thrust
    plane.
  • Above the thrust plane.
  • Below the thrust plane.


Question 4
When a sketch dimension has “fx:” before it, what does that mean?

  • The dimension is over
    defined.
  • The dimension is driven.
  • The dimension can’t be
    solved.
  • The dimension is linked.


Question 5
When using the Marking Menu in a sketch, what position is the sketch sub menu located?

  • 3 o’clock.
  • 12 o’clock.
  • 9 o’clock.
  • 6 o’clock.

Week 2 quiz


Question 1
What options are available when using Extend Surface?

  • Tangent.
  • Natural.
  • Smooth.
  • Perpendicular.


Question 2
Linking dimensions in a sketch can be done in what way(s)?

  • Through “Change
    Parameters”.
  • Manually entering a
    dimension name.
  • Selecting multiples while
    holding CTRL.
  • Selecting another dimension
    on screen.


Question 3
What options are available for a mirror feature?

  • Features
  • Components
  • Bodies
  • Faces


Question 4
When creating a sketch offset, how do you reverse the direction of the offset?

  • Change the offset value to
    a negative.
  • Offset only works outward.
  • Select “Reverse Offset” in
    the properties.


Question 5
What options are available for “Project Type” in the sketch project to surface tool?

  • Normal to Plane
  • Closest Point
  • Normal Vector
  • Along Vector

Week 3 quiz


Question 1
When creating a subdivided pipe what end types are available?

  • Open.
  • Spike.
  • Closed.
  • Square.


Question 2
Once a pipe is created where in Fusion 360 and you edit the pipe properties?

  • Timeline
  • You can’t edit once created.
  • Modify menu
  • Browser


Question 3
What feature in the Sculpt workspace allows you to joint two subdivided faces together?

  • Join
  • Bridge
  • Weld
  • Merge Edge


Question 4
When using soft modification in the edit form tool, what setting controls how far the edit affects the subdivided mesh?

  • Taper
  • Spread
  • Fallout
  • Falloff


Question 5
Where can you find the Center of Mass measurement at in Fusion 360?

  • Physical material dialogInspect tool
  • Body properties
  • Measure tool

Week 4 quiz

Question 1

What ways can you add a new environment to a render scene?

  • Double click from the
    environment library.
  • Drag and drop from the
    environment library.
  • Drag and drop from the
    appearance library.
  • Double click from the
    appearance library.


Question 2
Where can you adjust the scene camera settings?

  • Scene settings dialog.
  • Modify menu.
  • Appearances menu.
  • Camera settings dialog.


Question 3
When a part has both an appearance and a physical material applied, which one takes visual priority?

  • Appearance
  • Physical material


Question 4
When a decal is inserted on a face, what adjustments are available?

  • Scale
  • Translate
  • White balance
  • Rotate


Question 5
An in-canvas render produces an image through what?

  • Ray tracing
  • Cloud processing
  • Cloud rendering


Question 1
An ESC is an electronic component that goes between the flight controller and the motor. What does ESC stand for?

  • Extended Signal Carrier
  • Electronic Speed Controller
  • Electric Speed Circuit
  • Electronic Signal Center


Question 2
The type of battery used
in most quadcopters is a LiPo because of its good power output and lightweight. There are 3 main variables when choosing a battery: Voltage, Current, and Discharge. If I have a LiPo 3S
2000mAh 20-30C battery, how much amperage can it output continuously without
damage?

  • 60amp
  • 40amp
  • 35amp

20amp

3.
Question 3
Mass on any design can be
critical, but even more so on anything that flies. The overall mass and its location is critical to performance. If we have 300g worth of electronic components and 300g worth of body what is the approximate target weight for a set of batteries assuming 50-65% of the mass is battery? Hint: Solve for two variables. Battery =
X. Total = Y. X = 0.65Y & (300 +
300) = 0.35Y. Solve for Y and then Solve
for X.

  • 300-600g
  • 600-1100g
  • 500-1000g
  • 550-1200g


Question 4
What is it called when you
insert a design into a current file?

  • Linked design
  • Assembly design
  • Live design
  • Distributed design


Question 5
Creating a static rendered image can be impressive, but a turntable animation can take it to the next level. What options are available for number of images in a turntable render?

  • 6
  • 36
  • 18
  • 12


Question 6
When a sketch line is converted to construction, what happens to its appearance?

  • It changes to blue.
  • It changes to red.
  • It becomes solid.
  • It becomes dashed.


Question 7
When a sketch dimension is linked to a parameters, what letters are displayed in front of it?

  • Eq.
  • Ex.
  • Lk.
  • Fx.


Question 8
In what workspace do you create a subdivided pipe?

  • Model
  • Sculpt
  • Patch
  • Simulation


Question 9
What sculpt feature is used to create a blend between two faces?

  • Merge Edge
  • Bridge
  • Blend
  • Combine

Question 10

What is the name of the right click menu to measure a bodies mass?

  • Properties
  • Measure
  • Mass
  • Physical Material

Peer-graded Assignment: Model a simple chassis

Download

Conclution:

We hope you will do well in your 3D Model Creation with Autodesk Fusion 360 by our article. If you think It helps you a little please share it with your friends. And Stay with queryfor.com for any kind of Exam or quiz Answer. We also provide Coursera Quiz answer, Course hero free Unlock.

.

Similar Posts